The GeekVape 1.6ohm NS Coils for the GeekVape Flint MTL device are designed for running your favorite Nic Salts e-liquid. They are made out of NI80 and provide high vapour production with great flavour. The 1.6ohm coils are intended for higher strength nicotine salts and operate at 6-9W. Included in each pack are 5 of the long lifespan, high efficiency coils. The NS Coils are perfect for Mouth-to-Lung ("MTL") vapers.
Step 1. Drop e-liquid in the center of the coil ensuring the juice is soaked up by the cotton and let it slide down so it hits the cotton and wire. Repeat this process on the wick holes on the side of the coil. The juice will soak the cotton and this will ensure that you won't experience a dry hit.
Step 2. Attach your tank and fill with e-liquid then leave it to stand for a minute or two, so that the juice in the tank gets soaked up by the coil/atomizer too.
Step 3. After you have primed the coil and let it sit for a few minutes you should fire your device at the lowest recommended voltage and slowly increase to ensure your atomizer does not burn out right away. It's recommended that you don't fire your device at its maximum recommended voltage until you've puffed on it approximately 10 times.